by admin | Jul 16, 2020 | GeoView, Home, Software
GeoView – surveying software to work with coordinates in practice How to deal with many coordinates? How to quickly preview them in a CAD drawing or check in Google Earth? How to search duplicates of measured points comfortably? The answer is...
by admin | Mar 21, 2020 | GeoView, Support, Support topics
What should I do if a CAD program is not recognized by Cubic Orb’s program? If Cubic Orb’s program does not detect a running CAD platform (which may take place in systems newer than Windows XP), you should run the CAD program once as an...
by Kama | Mar 10, 2020 | GeoView, Support, Support topics
Select Tools -> Checking points Checking points – allows to perform advanced point control, consisting of finding groups of similar (or identical) points, according to given criteria. The result of the “checking points” is the text...
by Kama | Mar 10, 2020 | GeoView, Support, Support topics
In Selecting menu there are options for selecting points, so that only selected points are used to perform a given action, e.g. export to another file, drawing in a CAD program, translation, numbering points, etc. The selected point is highlighted...
by Kama | Mar 10, 2020 | GeoView, Support, Support topics
Select CAD -> Send (draw) Before using these options you have to run a CAD program and open any drawing. See: Selecting points After selecting the points to sent in the CAD drawing, select one of the options available from the drop-down list. Send...
by Kama | Mar 10, 2020 | GeoView, Support, Support topics
Our applications uses the mechanism of automatic recognition systems based on the coordinate ranges. To coordinate system was detected correctly, you must enable this system in the management of coordinate systems window. This window allow to enable...
